Debashis Sahoo is Executive Vice-President, Regulators & Key Customers, MedInstill Development.

Debashis Sahoo

Pharmaceutical and nutritional package integrity is often studied by incidental contamination, via immersion or aerosol microbiological challenge tests. Aerosol tests rely upon microorganisms settling from the atmosphere onto critical surfaces. Maintenance of a contaminated atmosphere is necessary to create the conditions that will cause a constant settling rate of the test microorganisms. Both parameters--maintenance of bioburden and duration of exposure--have to be monitored and controlled. It is important to understand the limitations of aerosol tests where the microbial contamination conditions are not maintained over the duration of the test. The following study describes a methodology to establish, control, and characterize an aerosolized bioburden within a test chamber and determine the settling rate of the bioburden. The intention of this paper is to stimulate the necessary discussion for the establishment of the standard criteria for all aerosol tests to generate comparable and reproducible data.

	Submitted: Aug. 25, 2017
	Accepted: Dec. 8, 2017

 is vice president, Intact Pharma Operations, atoba@medinstill.com; David A. Miller is manager, Device Performance Engineering; Debashis Sahoo is executive vice-president, Regulators & Key Customers; and Daniel Py is chairman and CEO-all at MedInstill Development. Bryan R. Campbell is a Doctor of Osteopathic Medicine at Touro University Nevada; and James P. Agalloco is president, Agalloco & Associates, and a member of the 

To whom all correspondence should be addressed.


	Vol. 42, No. 2
	February 2018
	Page: 44–51

	When referring to this article, please cite as F.A. Toba 

, “Establishing Correlation Between Aerosol and Surface Microbial Populations,” 

Articles

The following study describes a methodology to establish, control, and characterize an aerosolized bioburden within a test chamber and determine the settling rate of the bioburden.